page | 169
Default Settings
Appendix
Description Setting
MAC Address Device-dependent (cannot be modied)
IP Address 192.168.1.72
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
HTTP Listening Port 80
Telnet Listning Port 23
Telnet / TCP Access Enabled
UDP Port 50007
Enable UDP Access Disabled
Remote UDP IP Address 192.168.1.255
Remote UDP Port 50008
Remote UDP Access Disabled
Default Administrator Password Admin
Default Operator Password Operator
Gefen Syner-G Discovery Enabled
Gefen Syner-G Discovery Mode Read / Write
Gefen Syner-G Show Device Hide Me
Description Setting
Output Names Output A - Output D
A/V Input Names Input 01 - Input 04
HDCP (each input) Version 2.2 and below
HDCP (each output) Follow Input
EDID (each input) Internal UHD 4K 600Mhz 2Ch
RS-232 Feedback On
LED Brightness 50
IR Channel 1
Routing Input 01 > Output A
Input 02 > Output B
Input 03 > Output C
Input 04 > Output D
Preset Names Preset01 - Preset16
Matrix Lock Disabled
To Next Page
Loading...
Need help?
General
