Gefen EXT-UHD600A-44 User Manual

page | 142
Advanced Operation
Commands
#set_ip_mode
Sets the IP mode of the matrix. The matrix must be rebooted after executing this
command.
Syntax
#set_ip_mode mode
Parameters
mode
Type: INTEGER
Accepts a number from the table below, corresponding to the desired IP mode.
mode Description
0
Static
1
DHCP
2
Auto
Example
#set_ip_mode 1
IP MODE 1
REBOOT TO APPLY SETTINGS
Related Commands
#get_gateway
#get_web_port
#get_ip_address
#get_ip_mode
#get_ipcong
#get_mac_addr
#get_netmask
#set_gateway
#set_web_port
#set_ip_address
#set_netmask
Advanced Operation

Gefen EXT-UHD600A-44 Specifications

General

Brand	Gefen
Model	EXT-UHD600A-44
Category	Amplifier
Language	English