EasyManuals Logo

Gefen EXT-UHD600A-44 User Manual

Gefen EXT-UHD600A-44
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
page | 147
#set_netmask
Sets the network mask address. The matrix must be rebooted after executing this
command.
Syntax
#set_netmask addr
Parameters
addr
Type: ADDRESS
The desired subnet mask of the matrix. This address must be entered
in dot-decimal notation.
Example
#set_netmask 255.255.255.0
NETMASK 255.255.255.0
REBOOT TO APPLY SETTINGS
Related Commands
#get_gateway
#get_web_port
#get_ip_address
#get_ip_mode
#get_ipcong
#get_mac_addr
#get_netmask
#set_gateway
#set_web_port
#set_ip_address
#set_ip_mode
Advanced Operation
Commands

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gefen EXT-UHD600A-44 and is the answer not in the manual?

Gefen EXT-UHD600A-44 Specifications

General IconGeneral
BrandGefen
ModelEXT-UHD600A-44
CategoryAmplifier
LanguageEnglish

Related product manuals