Name: Gefen EXT-UHD600A-44
Brand: Gefen
Rating: 4 (1 reviews)

To Next Page

To Previous Page

page | 143

Advanced Operation

Commands

#set_ir_channel

Sets the IR channel of the matrix. In order to use the included IR remote control with the

matrix, both the matrix and the IR remote control must be set to the same IR channel.

Syntax

#set_ir_channel irch

Parameters

irch

Type: INTEGER

Accepts a number from the table below, corresponding to the desired IR channel.

irch Description

IR channel 1

IR channel 2

IR channel 3

IR channel 4

Example

#set_ir_channel 2

IR_CHANNEL 2

Related Commands

#get_ir_channel

Questions and Answers:

Need help?

Do you have a question about the Gefen EXT-UHD600A-44 and is the answer not in the manual?

Gefen EXT-UHD600A-44 Specifications

General