Gefen EXT-UHD600A-44 User Manual

page | 161
Advanced Operation
Commands
#set_vol
Sets the analog output volume level for the specied output(s).
Syntax
#set_vol output level
Parameters
output
Type: CHAR / INTEGER
The alphabetic identier of the output (A - D). Set this parameter to 0 to set all
outputs to the same volume level (Feedback lists all volume levels for outputs in
order A - D).
level
Type: INTEGER
The desired volume level (0 - 100).
Example
#set_vol a 100
VOL A 100
Related Commands
#get_vol

Gefen EXT-UHD600A-44 Specifications

General

Brand	Gefen
Model	EXT-UHD600A-44
Category	Amplifier
Language	English