Gefen EXT-UHD600A-44 User Manual

page | 74
Advanced Operation
Commands
#factory_reset
Resets the matrix to factory-default settings. If a factory reset is performed through the
built-in web interface or Telnet, then IP settings will be preserved. To reset all, including IP
settings, this command must be issued using RS-232.
Syntax
#factory_reset
Parameters
None
Example
#factory_reset
RESET TO FACTORY DEFAULTS
EXT-UHD600A-44 V1.00
OUT:ABCD
IN:1234
Related Commands
#reboot
Advanced Operation

Gefen EXT-UHD600A-44 Specifications

General

Brand	Gefen
Model	EXT-UHD600A-44
Category	Amplifier
Language	English