VRC2000 Installation and Operations Manual Page 115
Technical or Setup Assistance
Telephone: 800.945.7730 (USA) or 801.975.7200 (worldwide) • Worldwide Web @ http://www.gentner.com
The VRC2000 will respond with a double [BEEP].
Time-of-day function entry three will now activate at the first second of the
selected minute and hour.
The VRC2000 will say
• TIME OF DAY FOR ENTRY THREE IS ... {AM}
You enter
☎ “#”
The VRC2000 will respond with a double [BEEP].
Time-of-day function entry three will now activate during the afternoon
(PM). In this example, time selected is 11:59:01 p.m.
Use the “#” symbol to program the time-of-day function to activate during
the afternoon (PM); the “*” selected AM (before noon) portion of the day.
The VRC2000 will say
• TIME-OF-DAY DATE FOR ENTRY ONE IS ... {OCTOBER}
You enter
☎ “1 1”
The VRC2000 will respond with a double [BEEP].
Time-of-day function entry three will now activate in November.
The VRC2000 will say
• TIME-OF-DAY DAY FOR ENTRY ONE IS ... {TEN}.
You enter
☎ “0 0”
The VRC2000 will respond with a double [BEEP].
Time-of-day function three will now activate every day during the month of
November at 11:59:01 p.m.
The “0 0” entry for this parameter programs the VRC2000 to activate the
selected command-channel switch every day for the programmed month at
the programmed time.
The VRC2000 will say
• COMMAND CHANNEL NUMBER FOR ENTRY ONE IS ... {ONE}
You enter
☎ “0 8”
To Next Page
Loading...