Page 2 VRC2000 Installation and Operations Manual
Technical or Setup Assistance
Telephone: 800.945.7730 (USA) or 801.975.7200 (worldwide) • Worldwide Web @ http://www.gentner.com
Ensure that the following items (See Figure 1, below.) were received with your
shipment:
SHIPPING NOTE:
Gentner Communications is not responsible for product damage incurred during
shipment. You must make claims directly with the carrier. Inspect your shipment
carefully for obvious signs of damage. If the shipment appears to be damaged,
retain the original boxes and packing material for inspection by the carrier.
Contact your carrier immediately.
Direct access to all monitoring and control functions from any DTMF telephone
or PC
Multilevel security to prevent unauthorized access to your system
Precise meter readings for 16 parameters of your remote site (each channel
configurable for up to four tolerance limits)
Monitor the On/Off status of up to 16 remote-site parameters
Remote control of up to 16 command channels (each with two switches),
programmable to latching or momentary
Automatic reporting of alarm conditions
Automatic control of critical functions, activated by status or metering channel
alarm condition or regularly scheduled time
Customizable synthesized voice reporting (vocabulary of almost 800 words)
VRC2000 control unit required only at the remote location
The VRC2000’s flexible systemic architecture allows it to efficiently and
effectively monitor a wide variety of remote equipment (i.e. broadcast
transmitters). The VRC2000’s built-in voice synthesizer provides complete
control over your remote location from anywhere there is a telephone.
The VRC2000 responds to commands that you send with any standard DTMF
telephone. Other types of control interfaces are optionally available (Appendix C:
Accessories, Page 100).
The VRC2000 system allows you to define the operational characteristics of each
monitoring and control channel. You program the voice synthesizer to give you
only the information you need from every important monitoring channel. You
may also program the VRC2000 to act on its own when certain conditions are
Unpacking
Figure 1. Equipment diagram
Features and
Benefits
Product
Description
To Next Page
Loading...