Gentner VRC2000 - Step 5 - Access Command Channel; Step 6 - Energize Switch (A or B)

VRC2000 Installation and Operations Manual Page 71
Technical or Setup Assistance
Telephone: 800.945.7730 (USA) or 801.975.7200 (worldwide) • Worldwide Web @ http://www.gentner.com
Command Relay Unit
Figure 21 (below) provides examples of how to interface command-channel
outputs to a Command Relay Unit.
Figure 20 VRC2000 command-
channel input schematic
For information about the Command Relay Unit, see Appendix C:
Accessories (Page 100).
Figure 21. VRC2000-to-Command Relay
Unit electrical schematic