VRC2000 Installation and Operations Manual Page 1
Technical or Setup Assistance
Telephone: 800.945.7730 (USA) or 801.975.7200 (worldwide) • Worldwide Web @ http://www.gentner.com
Congratulations on purchasing the VRC2000 Voice Remote Control. The
VRC2000 is a very flexible remote control system. It can be set up to efficiently
and effectively monitor a wide variety of remote equipment, including
broadcast transmitters.
The VRC2000’s built-in voice synthesizer allows the unit to talk over any
standard dial-up telephone line in plain English, providing complete control
over your remote location from anywhere there is a telephone. The VRC2000
responds to commands sent by any standard touch-tone telephone. Other types
of control interfaces are optionally available, including a two-way radio
interface and modem connections for PCs.
The VRC2000 system allows you to define the characteristics of each monitor/
control channel. You program the voice synthesizer to give you the information
you need; you may also program the VRC2000 to act on its own when certain
conditions are met, including calling you to report alarm conditions.
This manual explains how to install, set up and operate the VRC2000 in a step-
by-step format. It also supplies instructions on how to resolve technical
problems, should any arise.
If you need any additional information on how to install, set up or operate your
system, please contact us at Gentner Communications at the location noted
below. We welcome and encourage your comments so we can continue to
improve our products and serve your needs.
Gentner Communications Corporation
1825 Research Way
Salt Lake City, UT 84119
TEL: Worldwide 801.975.7200 In U.S.A. 800.945.7730
FAX: Worldwide 801.977.0087 In U.S.A. 800.933.5107
FAX-On-Demand 24-Hour Information Service 800.695.8110
FAX-On-Demand International Line 801.974.3661
Worldwide Web Page @ http:\\www.gentner.com
Warranty Registration
Please register your VRC2000 by completing the self-addressed, postage
prepaid warranty registration card and return it to Gentner
Communications by mail. You may also FAX it to the above listed fax
number or call Gentner Communications. When your product is properly
registered, Gentner Communications will be able to serve you better should
you require technical assistance or desire to receive upgrades, new product
information, etc.
Introduction
To Next Page
Loading...