VRC2000 Installation and Operations Manual Page 61
Technical or Setup Assistance
Telephone: 800.945.7730 (USA) or 801.975.7200 (worldwide) • Worldwide Web @ http://www.gentner.com
You enter
☎ “0 2”
The VRC2000 will respond with a double [BEEP].
Status channel 2 will now activate mute-function entry one. Use two digits
to program the status-channel number for a mute function.
The VRC2000 will say
• STATUS CHANNEL CONDITION FOR DISARM ONE IS ... {INPUT CLOSED}
You enter
☎ “*”
The VRC2000 will respond with a double [BEEP].
Mute-function entry one will now be activated by status channel 2 going low.
The VRC2000 will use the words programmed to identify status channel 2’s
low state.
Enter a “*” symbol to program the mute function for the selected status
channel’s low state. Enter a “#” symbol to program the mute function for
thestatus channel’s high state.
The VRC2000 will say
• CHANNEL FOR DISARM ONE IS ... {METERING}
You enter
☎ “#”
The VRC2000 will respond with a double [BEEP].
Mute-function entry one is now set to mute (disarm), a metering channel.
The mute function will be activated by status channel 2 going low. All alarms
and automatic commands associated with the selected metering channel will
be defeated as long as the mute function is active. Enter a “#” symbol to
program the mute function to mute (disarm) a metering channel; enter a “*”
symbol to program the mute function to mute a status channel.
The VRC2000 will say
• CHANNEL NUMBER FOR DISARM ONE IS ... {ONE}
You enter
☎ “0 9”
The VRC2000 will respond with a double [BEEP].
Mute-function entry one will now be activated by status channel 2 going low;
it will mute (disarm) metering channel 9. Use two digits to enter the number
of the status or metering channel to be muted (disarmed).
To Next Page
Loading...