Gentner VRC2000 - Step 6 - Telephone Interface Connection; Step 7 - Four-Wire Connections (Dedicated Circuits)

Page 66 VRC2000 Installation and Operations Manual
Technical or Setup Assistance
Telephone: 800.945.7730 (USA) or 801.975.7200 (worldwide) • Worldwide Web @ http://www.gentner.com
The VRC2000 will respond with a double [BEEP].
Auto-logging is programmed to occur before noon (AM). Use “*” to select
AM; “#” selects PM.
The VRC2000 will say
• TIME-OF-DAY HOURS FOR LOGGING STOP TIME ARE ... {TWELVE}
You enter
☎ “0 7”
The VRC2000 will respond with a double [BEEP].
Auto-logging will now stop at the seventh hour of every day.
The VRC2000 will say
• TIME-OF-DAY MINUTES FOR LOGGING STOP TIME ARE ... {FIFTY-NINE}
You enter
☎ “3 5”
The VRC2000 will respond with a double [BEEP].
Auto-logging will now stop at the 35th minute of the selected hour.
The VRC2000 will say
• TIME OF DAY FOR LOGGING STOP IS {AM}
You enter
☎ “#”
The VRC2000 will respond with a double [BEEP].
Auto-logging will now stop after noon (PM). Enter “#” to select PM; use “*”
to select AM.
The VRC2000 will say
• LOGGING REPEAT TIME HOURS ARE ... {ZERO}
You enter
☎ “0 1”
The VRC2000 will respond with a double [BEEP].
The auto-logging function will now generate a new auto-log at least once
every hour.
VRC2000 Setup
Continued