106
A. Ceiling Mount: Secure the black rubber and the camera stand to
the other screw hole on the top.
B. Wall Mount: Secure the black rubber and the camera stand to
one of the screw holes on the bottom.
4. Use the screw anchors and self-tapping screws to secure the camera
to the wall.
5. Remove the protection sticker from the camera’s cover.
6. Connect the wires and cable connector to the camera. See 11.4.1
Waterproofing the Cable and 11.4.2 Connecting the Camera.
7. Access the live view. For details, see 24.2 Accessing the Live View.
Wall Mount
Ceiling Mount
To Next Page
Loading...
Need help?
General
