Gerber Technology GERBERplotter MP Series User Manual

167
GERBERplotter MP Series User Manual
English
Plotter beeps and doesn’t print the le
The le width is out of range. The plotter reports this
as excess width error.
1
Verify the markers have the correct dimensions. You
can use Preview and print function in the print menu.
2
Change the units and divisor in the extension menu if
necessary.
You can send les in which the width exceeds the pa-
per width as long as the Enable split option is enabled.
Why is the scale percent red?
When the scale is not 100%, a le is shown in red.

Gerber Technology GERBERplotter MP Series Specifications

General

Brand	Gerber Technology
Model	GERBERplotter MP Series
Category	Plotter
Language	English