168
GERBERplotter MP Series User Manual
English
One of the cartridges doesn’t print 1
Switch off and restart the plotter
2
Verify the cartridge ink. Replace the old car-
tridge with a new one to verify this.
3
Be sure that the rear cover xing screw is in-
stalled correctly.
There are wrinkles in the paper
Verify the top-cover wheels are loose and turn
easily.
Paper has different tension in both sides
Verify that the cones are correctly installed.
There are dot and lines in the display
Change the main board.
8.3 Mechanics & electronics
To Next Page
Loading...
