GM V2H Bundle - Wire the Dark Start

GM Energy V2H Bundle Installation Manual 45
Wire the Dark Start
Figure 32: Dark start wiring connections
The wires on the factory-integrated cable are pre-stripped. Insert the following wires into the following terminals (Figure
32 and Table 13):
Wire
Terminal
Red
+12V
Black
GND
Green
A
White
B
Dark Start Wiring
Type
Qty.
AWG
Size
Color
Torque if not
terminal
Label
Comm
4
14
1 Black
1 Green
1 White
1 Red
Lever attachment on
Inverter side (no torque
required).
@Dark Start:
N/A (integrated)
@Inverter:
GND Black
A Green
B White
+12V Red
Table 13