GM V2H Bundle - Appendix C: Accessories

GM Energy V2H Bundle Installation Manual 82
APPENDIX C: ACCESSORIES
Installer-Procured Accessories
Recommendations and links provided for convenience. Always reference the most current manufacturer installation guides for
the most up-to-date requirements.
Hub Main Breaker (100 A, 125 A, 150 A, 175 A, or 200 A), CSR (25 kAIC);
https://www.eaton.com/us/en-us/skuPage.CSR2200N.html
https://www.eaton.com/us/en-us/skuPage.CSR2175NSR12.html
https://www.eaton.com/us/en-us/skuPage.CSR2150N.html
https://www.eaton.com/us/en-us/skuPage.CSR2125N.specifications.html
https://www.eaton.com/us/en-us/skuPage.CSR2100BM.html
Hub Main Breaker (100 A, 125 A, 150 A, 175 A, or 200 A), BW (10 kAIC);
https://www.eaton.com/us/en-us/skuPage.BW2200.html
https://www.eaton.com/us/en-us/skuPage.BW2150.html
https://www.eaton.com/us/en-us/skuPage.BW2175.html
https://www.eaton.com/us/en-us/skuPage.BW2100BM.specifications.html
Required rubber covers for Hub Main Breaker:
https://www.eaton.com/us/en-us/skuPage.TICSR300C.html
https://www.platt.com/p/0318924/eaton/terminal-insulator-kit-breaker-
type/786676037150/cutticsr300
The recommended examples of Rapid Shutdown Devices (RSD) are:
IMO SI16-PEL64R-2 enclosed DC switch:
https://imoautomation.com/imo_us_usd_view/enclosed-dc-switch-ip66.html
Eaton switch consisting of:
• M22S-ST-GB10:
https://datasheet.eaton.com/datasheet.php?model=216499&locale=en_GB
• M22-WRK: https://www.eaton.com/us/en-us/skuPage.M22-WRK.html
• M22-KC10: https://www.eaton.com/us/en-us/skuPage.M22-KC10.html
• M22-I1-PG: https://www.eaton.com/us/en-us/skuPage.M22-I1-PG.html
Note: The RSD must be assembled in an outdoor-rated enclosure, visible at point of
interconnection to clearly indicate ON and OFF positions, and be labeled
appropriately. See Section 2.5.
Non-backup breaker pan, 48INT125B:
https://www.eaton.com/us/en-us/skuPage.48INT125B.html
https://www.platt.com/p/0847536/eaton/oem-br-loadcenter-
interior/786679094136/cut48int125b