GM Energy V2H Bundle Installation Manual 6
INTRODUCTION
This document describes the General Motors Energy (GM Energy) V2H Bundle system-level installation steps and
requirements for installing and commissioning the following equipment:
• GM Energy PowerShift (“Charger”)
• GM Energy Inverter (“Inverter” or “BDI”)
• GM Energy Home Hub (“Home Hub” or “Hub” or “MID”)
• GM Energy Dark Start Battery (“Dark Start Battery” or “DSB”)
The following shows how the equipment is categorized and bundled:
GM Energy V2H Enablement Kit
• GM Energy Inverter
• GM Energy Home Hub
• GM Energy Dark Start Battery
• GM Energy PowerShift Charger
• GM Energy V2H Enablement Kit
GM Energy PowerShift Charger
• GM Energy PowerShift Charger
For more information on each component, please refer to the component installation manuals, as follows. These
documents can be found at https://gmenergy.gm.com/for-home/installation-support.
• GM Energy PowerShift – GM Energy PowerShift Charger Installation Manual
• GM Energy Inverter – GM Energy Inverter Installation and Operation Manual
• GM Energy Home Hub – GM Energy Home Hub Installation and Operation Manual
• GM Energy Dark Start Battery - GM Energy Dark Start Battery Installation and Operation Manual
IMPORTANT: The installation content in this document is solely focused on the GM Energy V2H Bundle
(GM Energy PowerShift Charger, GM Energy Inverter, GM Energy Home Hub, GM Energy Dark Start
Battery). The GM Energy PowerBank and DC Solar panel integration into the Inverter is not available at
the time of this manual publishing date. Further documentation will be made available at
https://gmenergy.gm.com/for-home/resources-and-support when the features become available.
For further information, please call the GM Energy Support Center at 1-833-64POWER