Grundfos Hydro Multi-E User Manual

12.4 Menu overview for Grundfos GO
12.4.1 Main menus
Menu or function available for
system
Menu or function available for
pump
Dashboard ● ●
Status ● ●
Settings ● ●
Setpoint ●
Operating mode ●
Control mode ●
Pipe filling function ●
Buttons on product ●
LiqTec function ●
Stop function ●
Controller ●
Operating range ●
Ramps ●
Pump number ●
Radio communication ●
Analog input 1 ●
Analog input 2 ●
Digital input 1 ●
Digital input 2 ●
Signal relay 1 ●
Signal relay 2 ●
Limit 1 exceeded ●
Limit 2 exceeded ●
Standstill heating ●
Motor bearing monitoring ●
Service ●
Date and time ●
Store settings ●
Recall settings ●
Undo ●
Pump name ●
Unit configuration ●
Alarms and warnings ●
Assist ●
Product information ●
35
English (GB)

Grundfos Hydro Multi-E Specifications

General

Product Name	Grundfos Hydro Multi-E
Category	Water Pump
Pump Type	Multi-stage centrifugal pump
Number of Pumps	2-4
Pressure Range	Up to 16 bar
Motor Power	Up to 22 kW per pump
Shaft Seal	Mechanical Seal
Control Type	Electronic
Pump Model	CRE
Power Supply	3 x 380-480 V, 50/60 Hz
Max Head	160 m
Approvals	CE
Communication	Modbus, BACnet
Housing Material	Stainless steel
Impeller Material	Composite
Connection Size	DN32
Motor Type	Permanent magnet motor