GDM-8261 User Manual
48
ACV Hz
Measure the frequency response of
devices such as amplifiers or
buffers*.
* The frequencies of the amplifier
output must be within the DMM’s
measurable AC bandwidth for the
amplitude at a spot frequency to be
measured accurately.
Frequency Response
INPUT
V
COM
V
V
o
f
AMP
V
o
V
in
V
in
f
The following table shows the available measurement
combinations.
1st Display
2nd Display
ACV DCV ACI DCI Hz/P 2W/4W*
ACV
—
DCV
—
ACI
—
DCI
—
2W/4W*
Hz/P
—
Note 2w/4W measurements in combination with other
measurements are possible but may not be practical as
the measurement accuracy is not guaranteed.
When two separate measurements are taken, there is a
switching delay between the first measurement and the
second measurement.
1st Measurement
item setting
Choose a basic measurement from
the above table. Example: press the
To Next Page
Loading...
