EasyManua.ls Logo

Hadeco Smartdop 30EX - Specifications

Hadeco Smartdop 30EX
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Smartdop
®
30EX Basic Operation
13. SPECIFICATIONS
Probes Freq. Model# GTIN# Ispta* (in situ) [mW/cm²]
(For transcutaneous use): 5 MHz BT5M05S8A 00894912002333 720 mW/cm² or less
8 MHz BT8M05S8A 00894912002357 720 mW/cm² or less
10 MHz BT10M5S8A 00894912002302 720 mW/cm² or less
*Ispta: Spatial Peak - Temporal Average Intensity
Power: NiMH rechargeable battery pack or AC adaptor
Input: 100-240V AC - 0.3A (max), 50/60Hz
Output: 12 V DC
Fuse: 500 mA or more
Consumption: DC 12 V, 500 mA
Recharge: Approx. 4 hours by AC adaptor
Full charge life: 7 hours or more with printing
Battery life: Approx. 2 years, 300 full charges
Automatic shut-o󰀨: No signal: 5 min. Freeze: 10 min. Others: 15 min.
Frequency range: 200 Hz to 5 kHz
Mode settings: Operation, Display, Direction, Memory, Others
Waveform memory: 30 waveforms
LCD display: 128 x 64 dots, STN LCD
Bidirectional waveform
Numerical data (systolic & mean velocities, HR)
Heart rate: 30 to 240 bpm
Battery level and low battery indicators
Blood Pressure data (pressure prole, ABI, TBI)
PV Arterial waveform
Printer:
Paper: 58 mm (W) x 25 m (L) per roll, thermal
Resolution: 332 dots per line
Print speed: Approx. 2.5 mm/sec
Accuracy:
Velocity: ±10% or less comparing with internal phantom testing
Heart rate: ±5%
Pressure: ±5 mmHg
Speaker output: 250 mW or more
Ination rate: 10 - 20 mmHg/sec
Deation rate: 2 - 5 mmHg/sec
External outputs: Headset, USB port
Electrical safety: Conforms to IEC60601-1
Internally powered equipment
Type BF applied part
Operating environment: 10 to 37 degrees centigrade
85% humidity or less with no condensation
Storage and transport environment: 0 to 50 degrees Centigrade
85% humidity or less with no condensation
Dimensions:
Main unit: 252 (W) x 192 (D) x 91 (H) mm
Probe: 20 (Diam) x 105 (L) mm
Weight: 1.6 kg (including 1 probe)
Manufacturing date: The rst 2 digits and following 2 digits of the serial number represent
the year and month of manufacturing, respectively. (i.e. 1701001:
Jan/2017)
Not made with natural rubber latex
* Specications are subject to change
43

Table of Contents

Other manuals for Hadeco Smartdop 30EX

Related product manuals