Hasler WJ185 - Installation; Preparation of the Mailing Machine; Installation with the Feed Platform

Overall presentation18
ORIG0140-18
4127718F/B
02/26/2007
1.2 Installation
1.2.1 Preparation of the mailing machine
The mailing machine should be installed on a flat horizontal
surface.
Allow sufficient free space as follows:
- above the machine to enable the opening of the covers
- at the rear for the machine cooling.
With the O/I switch in the “ O ” (OFF) position, connect the power
cord to the rear of the machine and to an 110V AC electrical outlet.
Insert one end the telephone cable into the modem connector at
the rear of the machine and the other to an analog telephone wall
jack for Tele-Meter Setting
®
resetting connection.
For security purposes, please ensure that all the items are
correctly assembled prior to switch on the configuration.
1.2.2 Installation with the feed platform
Assemble the feed platform with the mailing machine.
Prior to moving the whole machine, you must separate
the mailing machine from the feed platform.