Overall presentation44
ORIG0140-44
4127718F/B
02/26/2007
1.5.2 Mixed-mail feeder
- Remove the bottle and turn it over.
- Unscrew the cap.
- Fill the bottle up to the limit marks.
- Screw the cap back on again.
- Put the bottle back in its place
- Shake the bottle gently once or twice in
order to drive out the air and start the water flow.
1.6 Envelope moistening
1.6.1 Standard automatic feeder
Use the moistening for thin or medium letters in the A position.
Touch the SEAL key. In the moistening mode, the symbol
is displayed on the screen.
Do not insert envelopes that are already sealed when the
mail machine is in the moistening mode: This might
cause a stoppage.
For productivity purpose, you can preset job memories
including the SEAL mode (see section B, 2.1).
When touching
(sealing ON), or
OFF
(sealing OFF), it switches from one to the other, and vice
versa.
To Next Page
Loading...
