Trouble shooting142
ORIG0140-142
4127718F/B
02/26/2007
1.2 Problems machine and feeder
SOLUTION
Check the power cord and the
connection.
- Is it switched on? Is it connected?
- Is the printer mode selected in
the SETUP menu?
- Make sure that it is properly
connected (see page 25).
- Make sure that the feeder and
machine covers are closed.
- Is the feeder connected?
- If you have no feeder, make sure
that the terminator is fitted (see
page 25).
- Make sure in menu IMPRNT/
MODE that the machine is not in
the PASS THR or the MESSAGE
mode (with no message selected).
Return to NORMAL mode.
- Did you remove the protections
from the printhead before
inserting it into the machine?
- Clean the printhead (menu
CLEAN).
PROBLEM
The machine cannot get
started.
The printer does not operate
The feeder does not
operate.
The machine displays the
message "COVER OPEN"
at start-up.
The machine does not print
and displays no message.
To Next Page
Loading...
