Hasler WJ185 - Entering Postage Value and Mail Processing; Entering Postage Value; Manually; With an External Scale

Entering Postage Value and Mail Processing68
ORIG0140-68
4127718F/B
02/26/2007
4. ENTERING POSTAGE VALUE AND MAIL
PROCESSING
4.1 Entering postage value
4.1.1 Manually
- Press key
C
if a value different from zero is displayed and enter
the postage value required, using the numeric keys. In case of
error, press
C
. When a dynamic scale is present, mode
transport should be selected to print on envelope.
4.1.2 With an external scale
this icon indicates that the external scale function is ON..
Place a mail item on the external scale and press "Set Meter" or
"Print Tape" to transmit the calculated value to the mailing machine.
When a dynamic scale is present, the mode of transport should be
selected to print on envelope.
4.1.3 With a dynamic scale
Do not lean on or disturb the system while it is processing
in the dynamic weighing mode; it will affect the amount
of postage applied to the mail.
- From the main screen, touch
SCALE
to select a mode (see
section "Use of the dynamic scale"), using arrows and
, and touch
OK
to confirm the selection.
- From the main screen, touch
MENU
, select the RATE menu,
the screen below appears: