Hasler WJ185 - Filling of the Removable Water Bottle; Standard Automatic Feeder

Overall presentation 43
ORIG0140-43
4127718F/B
02/26/2007
1.5 Filling of the removable water bottle
When there is no water left in the bottle, the feeder and the
mailing machine can still be operated but no envelope
sealing can be done.
In case of an intensive use of the moistener and for
optimal operation of your machine, use Hasler sealing
solution.
1.5.1 Standard automatic feeder
- Open the feeder cover.
- Remove the bottle from its recess and turn it over.
- Unscrew the cap.
- Fill the bottle up to the limit marks.
- Screw the cap back on again.
- Put the bottle back in its place.
- Lift the bottle lightly once or twice in order to drive out the air and
start the water flow.
- Close the cover.