Hasler WJ185 - Mail Processing; Envelopes with Autofeed Sealer (Except Batch Mode); Envelopes with Dynamic Scale in Batch Mode

Entering Postage Value and Mail Processing72
ORIG0140-72
4127718F/B
02/26/2007
4.2 Mail processing
4.2.1 Envelopes with Autofeed Sealer (except batch
mode)
- Place a stack of envelopes on the feed platform and press key
START
STO P
.
- To stop the envelope feeding, press key
START
STOP
again (or wait
for a few seconds until the machine stops automatically when
there are no more envelopes to be processed).
If the selected Mail Class has a ZIP code dependant
destination, perform the following steps:
- Select ZIP as the destination in the rate selection screen;
- Put on the feeder a stack of envelopes with same desti-
nation ZIP;
- When
START
STOP
is pressed, the mailing machine will ask for
input of the destination ZIP code (used for the whole
batch of envelopes).
4.2.2 Envelopes with dynamic scale in batch mode
- Place an envelope or a stack of envelopes on the feed platform
and press key
START
STOP
: the first envelope is weighed. The rate
calculator defines the corresponding value and displays it.
- Touch
OK
to confirm (or
ESCAPE
to cancel).