Overall presentation 37
ORIG0140-37
4127718F/B
02/26/2007
- It is possible to set to portrait feed a few large size
envelopes (10"x13" approx.).
- The guides may be retracted when required.
- Do not mix moistening and non-moistening.
- Arrange the mail according to the size (the largest letters
beneath).
- Envelopes of different thickness may be mixed together.
Adjustment according to letter thickness
- Open the top cover of the feeder;
- Move the blue lever to the desired position.
Position
A
of the conveyor should be used for feeding thin and
medium letters (from 0 to 3/8 inch). Sealing is available in this
position.
Position
B
of the conveyor is designed to facilitate the feeding
or manual insertion of thick letters (from 3/8 to 5/8 inch without the
dynamic scale and from 3/8 to 1/2 inch with the dynamic scale;
please use labels instead for thicker mail). Care should be used
when sealing thick envelopes. Bulky envelopes could cause a
stoppage.
To Next Page
Loading...
