101
GB
Adjusts the amount of ash light in 1/3 EV steps in a range of –3.0 EV to +3.0 EV. Flash
compensation changes the amount of ash light only. Exposure compensation changes
the amount of ash light along with the change of the shutter speed and aperture.
Flash Comp.
1 Press the (flash pop-up) button to pop up the flash.
2 MENU
[Brightness/Color]
[Flash Comp.]
desired value.
Selecting higher values (+ side) makes the ash level higher and images brighter. Selecting
lower values (– side) makes the ash level lower and images darker.
• You cannot use [Flash Comp.] with the following functions:
– [Intelligent Auto]
– [Scene Selection]
– [Anti Motion Blur]
– [Sweep Panorama]
• e higher ash eect may not be visible due to the limited amount of ash light available, if the
subject is outside the maximum range of the ash. If the subject is very close, the lower ash eect
may not be visible.
Tips to adjust the brightness when shooting people
• It is important to balance the brightness of people against
the dark background in night portraits. You can adjust
the brightness of people near the camera by changing the
ash light intensity.
• If the subject is too far for the ash and still too dark
aer adjustment, move closer to your subject.
Table of
contents
Table of
contents
Sample photo
Menu Index
Notes
To Next Page
Loading...
Need help?
General
