142
GB
AF Adjustment
Setting
Sets whether or not to use the [AF Micro Adj.] function. Select [On]
to use it.
amount
Allows you to select an optimum value between –20 and +20.
Selecting a larger value shis the autofocused position away from
the camera. Selecting a smaller value shis the autofocused position
closer to the camera.
Clear
Clears the value you set.
AF Micro Adj.
Allows you to adjust and register an autofocused position for each lens, when using an
A-mount lens with the LA-EA2 Mount Adaptor (sold separately).
1 MENU
[Setup]
[AF Micro Adj.].
2 [AF Adjustment Setting]
[On].
3 [amount] desired value
OK.
• It is recommended that you adjust the position under actual shooting conditions.
• When you attach a lens for which you have already registered a value, the registered value appears
on the screen. [±0] appears for lens for which a value has yet to be registered.
• If [–] appears, more than 30 lenses have been registered. If you want to register another lens, you
must rst clear a value. Attach a lens of the value to be cleared and select [±0]. If you want to clear
all registered values, select [Clear].
• Use [AF Micro Adj.] with Sony, Minolta, and Konica-Minolta lenses only. If you use [AF Micro
Adj.] with other brands of lenses, the registered value may be aected.
• You cannot set [AF Micro Adj.] individually for a Sony, Minolta, and Konica-Minolta lens of the
same specication.
Table of
contents
Sample photo
Menu Index
Notes