Hasselblad Digital Camera Handbook

194
GB
• When printing images using your own printer, cancel the trimming or borderless settings.
Consult the printer manufacturer as to whether the printer provides these functions or not.
• When having images printed at a photo printing service shop, ask the shop whether they can
print the images without cutting o both edges.
Cannot print images with the date.
• Using “PMB,” you can print images with date.
• e camera does not have a feature for superimposing dates on images. However, because the
images shot with the camera include information on the recording date, you can print images
with the date superimposed if the printer or the soware can recognize Exif information. For
compatibility with Exif information, consult the manufacturer of the printer or the soware.
• When you print images at a shop, images can be printed with the date if you ask them to do so.
Others
The lens gets fogged.
• Moisture condensation has occurred. Turn o the camera and leave it for about an hour before
using it.
The message “Set Area/Date/Time.” appears when the camera is turned on.
• e camera has been le unused for sometime with a low battery or no battery pack. Charge
the battery pack and set the date again (page 150). If the message appears every time you charge
the battery pack, the internal rechargeable battery may be exhausted. Consult your Hasselblad
dealer or local authorized Sony service facility.
The date and time are recorded incorrectly.
• Correct or check the date and time setting by selecting MENU [Setup] [Date/Time Setup].
The number of recordable images does not decrease, or decreases 2
images at a time.
• is is because the compression rate and the image size aer compression change depending
on the image when you shoot a JPEG image.
The setting is reset without the resetting operation.
• e battery pack was removed when the power switch was set to ON. When removing the bat-
tery pack, make sure the camera is turned o and the access lamp is not lit.
The camera does not work properly.
• Turn o the camera. Remove the battery pack and insert it again. If the camera is hot, remove
the battery pack, and allow it to cool down before trying this corrective procedure.
• If an AC Adaptor (sold separately) is used, disconnect the power cord. Connect the power cord
and turn on the camera again. If the camera does not work aer doing these solutions, consult
your Hasselblad dealer or local authorized Hasselblad service facility.
“--E-” is indicated on the screen.
• Remove the memory card, and insert it again. If this procedure does not turn o the indication,
format the memory card (page 166).
Table of
contents
Sample photo
Menu Index

Hasselblad Digital Camera Specifications

General

Brand	Hasselblad
Model	Digital Camera
Category	Digital Camera
Language	English