195
GB
If the following messages appear, follow the instructions below.
Incompatible battery. Use correct model.
• An incompatible battery pack is being used.
Set Area/Date/Time.
• Set the date and time. If you have not used the camera for a long time, charge the interna
rechargeable battery.
Power insufficient
• You tried to clean the image sensor (Cleaning Mode) when the battery level was insucient.
Charge the battery pack or use an AC Adaptor (sold separately).
Unable to use memory card. Format?
• e memory card was formatted on a computer and the le format was modied. Select OK,
then format the memory card. You can use the memory card again, however, all previous data
in the memory card is erased. It may take some time to complete the format. If the message still
appears, change the memory card.
Memory Card Error
• An incompatible memory card is inserted or the format has failed.
Reinsert memory card.
• e inserted memory card cannot be used in your camera.
• e memory card is damaged.
• e terminal section of the memory card is dirty.
This memory card may not be capable of recording and playing normally.
• e inserted memory card cannot be used in the camera.
Processing...
• Long exposure noise reduction or high ISO noise reduction is being carried out. You cannot
do any further shooting during this reduction process. You can disable the long exposure noise
reduction function.
Unable to display.
• Images recorded with other cameras or images modied with a computer may not be able to be
displayed.
Cannot recognize lens. Attach it properly.
• e lens is not attached properly, or the lens is not attached. If the message appears when a lens
is attached, reattach the lens. If the message appears frequently, check whether the contacts of
the lens and camera are clean or not.
• When attaching the camera to an astronomical telescope or something similar, set [Release w/o
Lens] to [Enable] (page 132).
Warning messages
Table of
contents
Sample photo
Menu Index
Continued
To Next Page
Loading...
Need help?
General
