Hasselblad Digital Camera - Using the Remote Commander

70
GB
BULB
You can shoot trails with long exposure. BULB is suitable for shooting trails of light, such
as reworks.
• Since the shutter speed becomes slow and the camera shake tends to occur more easily, it is recom-
mended that you use a tripod.
• e longer the exposure time, the more conspicuous the noise on the image.
• Aer shooting, noise reduction (Long Exposure NR) will be done for the same amount of time
that the shutter was open. You cannot do any further shooting during the reduction.
• When the [Smile Shutter] or [Auto HDR] function is activated, you cannot set the shutter speed to
[BULB].
• If the [Smile Shutter] or [Auto HDR] function is used with the shutter speed set to [BULB], the
shutter speed is temporarily set to 30 seconds.
1 MENU

[Shoot Mode]

[Manual Exposure].
2 Turn the control dial L until [BULB] is indicated.
3 Press the shutter button halfway down to adjust the focus.
4 Press and hold the shutter button for the duration of the shooting.
As long as the shutter button is pressed, the shutter remains open.
Using the Remote Commander
Table of
contents
Sample photo
Menu Index
Notes
Pressing the SHUTTER button on the Wireless Remote Commander triggers BULB
shooting and pressing it again stops BULB shooting. You do not need to press and hold
the SHUTTER button on the Wireless Remote Commander.
To use the Wireless Remote Commander, press (Drive Mode) on the control wheel,
and select [Remote Cdr.].