Hasselblad Digital Camera - Cleaning Mode; Attach the Lens

162
GB
Table of
contents
Sample photo
Menu Index
Allows you to clean the image sensor.
1 MENU

[Setup]

[Cleaning Mode]

OK.
e message “Aer cleaning, turn camera o. Continue?” appears.
2 Select OK.
e anti-dust is activated automatically.
3 Turn the camera off.
4 Detach the lens.
5 Use the blower to clean the image sensor
surface and the surrounding area.
6 Attach the lens.
• Cleaning can be performed only when the battery level is (3 remaining battery icons) or
more. e use of an AC-PW20 AC Adaptor (sold separately) is recommended.
• Do not use a spray blower because it may scatter water droplets inside the camera body.
• Do not put the tip of a blower into the cavity beyond the mount, so that the tip of the blower does
not touch the image sensor.
• Hold the camera’s face downward to prevent the dust from resettling in the camera.
• Do not apply a mechanical shock to the camera during cleaning.
• When cleaning the image sensor with a blower, do not blow too hard.
Notes
Cleaning Mode