69
GB
Manual Exposure
You can shoot with the desired exposure setting by adjusting both the shutter speed and
aperture.
1 MENU
[Shoot Mode]
[Manual Exposure].
2 Set the shutter speed, aperture, ISO with the control dials L/R, and the
control wheel.
Check the exposure value at “MM” (metered manual).
Toward +: Images become brighter.
Toward –: Images become darker.
0: Appropriate exposure analyzed by the camera
3 Adjust the focus and shoot the subject.
You can adjust the shutter speed, aperture value and ISO also during movie recording.
• You cannot select [Flash O] and [Autoash] in [Flash Mode]. When you want to re the ash,
press the (ash pop-up) button to pop up the ash. When you do not re the ash, push down
the ash.
• e (SteadyShot warning) indicator is not indicated in manual exposure mode.
• e ISO setting [ISO AUTO] is set to [ISO 100] in manual exposure mode. Set the ISO sensitivity
as necessary.
• e brightness of the image on the LCD monitor may dier from the actual image being shot.
• When using an A-mount lens (sold separately), you can adjust the shutter speed, aperture, ISO
when focusing manually during movie recording.
Continued
Table of
contents
Table of
contents
Sample photo
Menu Index
Notes