82
GB
Face Detection
Detects the faces of your subjects and adjusts the focus, ash, exposure, and white balance set-
tings automatically. You can select the priority face to be focused on.
• You cannot use [Face Detection] with the following functions:
– [Sweep Panorama]
– [Manual Focus]
– [Prec. Dig. Zoom]
• You can select [Face Detection] only when [Autofocus Area] is set to [Multi], and [Metering
Mode] is also set to [Multi].
• Up to 8 faces of your subjects can be detected.
• During [Smile Shutter] shooting, [Face Detection] is automatically set to [On (Regist. Faces)] even
if it is set to [O].
(On (Regist.
Faces))
Focuses on faces registered so as to have priority.
(On)
Selects the face which the camera is to automatically focus on.
(Off)
Does not use the Face Detection function.
Face Detection frame (gray/magenta)
This frame appears on a detected face that is not the face with the
priority focus. The magenta frame appears on a face that is registered
with [Face Registration].
1 MENU
[Camera]
[Face Detection]
desired mode.
Face Detection frame (white)
When the camera detects more than 1 subject, the camera will judge
which is the main subject and set focus by priority. The Face Detection
frame for the main subject will turn white. The frame for which the focus
is set will turn green by pressing the shutter button halfway down.
Table of
contents
Sample photo
Menu Index
Notes
To Next Page
Loading...
Need help?
General
