96
GB
Adjusting ISO Sensitivity (Recommended Exposure
Index)
• [ISO AUTO] is selected when using the following functions:
– [Intelligent Auto]
– [Scene Selection]
– [Anti Motion Blur]
– [Sweep Panorama]
• e larger the number, the higher the noise level.
• When the exposure mode is set to [Program Auto], [Aperture Priority], [Shutter Priority], and [ISO]
is set to [ISO AUTO], ISO is automatically set between ISO100 and ISO1600.
• You can select up to ISO3200 for movie recording. When you start recording movies with an ISO
higher than 3200, ISO becomes 3200 automatically, and returns to the previous value when record-
ing is nished.
• e [ISO AUTO] setting is not provided in [Manual Exposure]. If you change the exposure mode to
[Manual Exposure] with the [ISO AUTO] setting, it is switched to 100. Set the ISO according to your
shooting conditions.
ISO
AUTO
(ISO AUTO)
Sets the ISO sensitivity automatically.
100/200/400/800/
1600/3200/6400/
12800/16000
Sets the sensitivity to light of the imaging sensor. Higher sen-
sitivities enable faster shutter speeds and/or smaller apertures
(larger F-values). e higher the sensitivity, the more image
noise can become visible.
ISO
Sets the luminous sensitivity.
1 MENU
[Brightness/Color]
[ISO]
desired setting.
ISO setting (speed) is the sensitivity to light of recording media that incorporates an
image sensor that receives light. Even when the exposure is the same, images dier
depending on the ISO setting.
High ISO sensitivity
With high ISO sensitivity, images will be captured with an
appropriate brightness even under insucient exposure.
However, increasing ISO sensitivity will cause images to
become noisy.
Low ISO sensitivity
You can record smooth images. However, compensation
for low ISO sensitivity will be made by slowing down the
shutter speed. You should take camera shake or movement of
subjects into account, too.
Table of
contents
Sample photo
Menu Index
Notes
To Next Page
Loading...
Need help?
General
