Safety instructions
Labelling
The product will be marked with this symbol when it is important that you refer to the
associated danger or warning statement given in this document.
This document uses this symbol when a danger or warning statement is applicable.
Hazardous Voltage/Electricity. Both the product and this document use this symbol when
there is a risk for shock or electrocution.
Danger Signals an imminent hazardous situation, which, if not avoided, will result in death or serious
injury.
Warning Signals a possibly hazardous situation, which, if not avoided, will result in death or serious
injury.
Caution Signals a hazardous situation, which, if not avoided, could result in minor or moderate injury
or damage to the product.
Notice Signals a situation or practice that requires attention, but does not directly result in personal
injury if ignored.
Safety instructions
Environmental hazards
Do not cover the fan outlets or the bottom of the device.
Do not operate on a tabletop without unfolding the feet.
If the product has been stored or transported in extreme temperatures, wait at least 2hours before
switching it on.
Do not expose the product to direct sunlight or intense sunlight for too long, including behind car windows.
Protect the product against direct contact with water and moisture. Should condensation form during
transportation or storage, acclimatize the product for at least 2hours before operating.
Do not operate the product above the maximum operational altitude of 2000m.
The product is designed for use in clean and dry rooms with pollution degree 2.
The product must not be operated where there is a risk of explosion or in an aggressive chemical
environment.
In the event of ambient temperatures outside the specified range, the system will take measures to ensure
proper cooling (increase fan speed) and eventually securely switch off the system if sufficient cooling cannot
be ensured.
- 12 -
To Next Page
Loading...
