EasyManua.ls Logo

HBK FUSION - Declaration of Conformity

Default Icon
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Declaration of conformity
Declaration of conformity
NOTE
The following is only guaranteed using accessories listed in this document.
Conforms with the following national and international standards or technical specifications:
The CE marking is the manufacturer's declaration that the product meets the
requirements of the applicable EU directives.
RCM mark indicates compliance with applicable ACMA technical standards that is, for
telecommunications, radio communications, EMC and EME.
China RoHS mark indicates compliance with administrative measures on the control of
pollution caused by electronic information products according to the Ministry of
Information Industries of the People’s Republic of China.
WEEE mark indicates compliance with the EU WEEE Directive.
The UKCA (UK Conformity Assessed) marking is a UK product marking that is used for
goods being placed on the market in Great Britain.
Safety EN/IEC61010-1 and ANSI/UL61010-1: Safety requirements for electrical equipment for
measurement, control and laboratory use.
EMC Emission EN/IEC61326-1: Electrical equipment for measurement, control and laboratory use
EMC requirements.
CISPR 11 and EN55011: Industrial, scientific and medical equipment. Radio-frequency
disturbance characteristics. Limits and methods of measurement.
CISPR32 and EN 55032: Radio disturbance characteristics of information technology
equipment. Class A Limits.
FCC Rules, Part 15: Complies with the limits for a Class A digital device.
This ISM device complies with Canadian ICES-001 (standard for interference-causing
equipment).
EMC Immunity EN/IEC61326-1: Electrical equipment for measurement, control and laboratory use
EMC requirements.
Note: Please see this document for information on cables, connectors and shielding
concept to be applied to ensure the product EMC compliance.
Temperature EN/IEC60068-2-1: Environmental Testing. Cold.
EN/IEC60068-2-2: Environmental Testing. Dry Heat.
Operating Temperature: –20 to +60°C (–4 to 140°F) Storage Temperature: –40 to
+75°C (–40 to 167°F)
- 15 -

Table of Contents

Related product manuals