Using HBK COMPANION
4. Repeat steps 2 and 3 for all measuring points.
5. Export the project.
6. Import the project as a completed setup file in HBK ADVANTAGE.
See "Using HBK COMPANION" below for more information. In the app, open the help from the home page
to get instructions and greater details.
Using HBK COMPANION
To use the HBK COMPANION app, you must have:
l
An Android™ mobile device (Android version 10, 11 and 12 or later)
l
HBK ADVANTAGE software with a valid license (for import/export of channel setup files)
l
Permission to access specific mobile device functions (to scan barcodes, take pictures, and
store/download files)
Installation is via the Google Play™ Store. Search for HBK COMPANION and tap Install.
The use of barcodes in the app
The barcode reader in HBK COMPANION uses the camera in your mobile device to read both 1-dimensional
and 2-dimensional barcodes (a QR code is an example of a 2-dimensional barcode) .
HBK FUSION hardware and all supported HBK sensors are labelled with barcodes, which are encoded with
information about the device.
Barcodes can be found attached directly on the device as well as on documentation supplied with the
device.
Be aware to scan the correct barcode:
l
Scan the barcode of the input board (on included documentation or on the board) to define the
connected DAQ.
l
Scan the barcode on the included sensor datasheet to define the sensor name, sensor ID and sensor
properties.
l
Scan a customized barcode to define the measuring point name, ID and position.
l
Scan the barcode on the sensor to define sensor orientation.
- 39 -
To Next Page
Loading...
