HBK FUSION - Sensor characteristics; Scaling type; When the sensor is a direct voltage transducer

When the sensor is a direct voltage transducer
Characteristics
For each channel, individual sensor scaling can be defined and applied. The scaling type will determine what
other parameters need to be defined.
Go to "Sensor characteristics" below for information on these parameters.
When the sensor is a direct voltage transducer
Connector pinning
Transducers are connected via a cable directly into the channel connector. The diagram reflects that simple
connection.
Characteristics
For each channel, individual sensor scaling can be defined and applied. The scaling type will determine what
other parameters need to be defined.
Go to "Sensor characteristics" below for information on these parameters.
Sensor characteristics
For each channel, individual sensor scaling can be defined and applied. The scaling type will determine what
other parameters need to be defined.
Scaling type: This determines the calibration characteristic and defines how a valid range of electrical values
(for example, from 0 to 10mV/V) is mapped to corresponding engineering values (for example, from 0 to
50N). Select either No (no scaling applied) or from the following types:
- 44 -