Fan modes of operation
Fan modes of operation
Silent mode
l
Quietest mode with the fans running slowly
l
This mode will work well for a limited time, and at normal ambient temperatures
Office mode
l
Mode where the fans are running at a slightly louder, medium speed
l
Regarding noise, this mode would be a good compromise when used at normal office temperatures
Factory mode
l
Mode where the fans are running at a higher speed, with more cooling
l
This mode would be the best choice if noise is not an issue
Maximum mode
l
Mode where the fans are running at maximum speed
l
This mode can be used as a 'safety' setting when used in very warm environments
l
If the internal temperature exceeds the limit in this mode, the frame will safely be switched off to
avoid damage of electronic components
Reset the device
To reset the device (frame or board), you must go to the frame's web page.
1. In a web browser, enter the frame's IP address in the address bar.
2. Go to the Settings tab.
3. Click Reset.
- 66 -
To Next Page
Loading...
