179
9.2 Disposal
The following components are made of steel and can be recycled via
a local recycling centre.
• Boiler without motors
• Cladding
• Feeding system without motor
• Transfer station without motor
• Delivery system
The electrical components can also be recycled via the local recycling
centre.
Fibreglass, mineral wool and plastic parts such as suction hoses etc.
should be handed in to the respective waste disposal centres.
The geared motors used consist largely of materials which can be re-
cycled. If a geared motor cannot be handed over complete to a sui-
table company for proper disposal, proceed as follows:
1. The gear oil must be drained into a suitable container.
2. The geared motor should be dismantled into its separate compo-
nents and cleaned if necessary.
3. Metal parts should be recycled.
Oily or greasy components and condensers may only be disposed
of through a specialist waste disposal centre.
To Next Page
Loading...
