27 – 446 HEIDENHAIN Service Manual iTNC 530 HSCI
Touch probes
TS 740, TS 640, TS 642, TS 444, TS 440
Touch-trigger probe with infrared transmission, for workpiece
setup and measurement during machinin; for machines with
automatic tool changer
TS 440 with compact dimensions
TS 444 with alternative battery-free power supply via
compressed air through the spindle head
TS 640 with wide-range infrared transmission and long
operating time
TS 642 with mechanical activation switch in the clamping
shank
TS 740 with high probing accuracy and repeatability, and
low probing forces
The infrared transmission is established between the
TS touch probe and the SE transceiver unit. The following
SE units can be combined with the TS touch probes:
SE 640 for integration in the machine workspace
SE 642 for mounting in the workspace, for operation of a
TS 44x, TS 64x, TS 74x infrared workpiece touch probe and
the TT 449 infrared tool touch probe
SE 540 for integration in the spindle head
TS 740
TS 640
TS 642
TS 440
TS 444
SE 640
transmitter-receiver unit
SE 642
transmitter-receiver unit
SE 540
transmitter-receiver unit
TS 640, TS 740 TS 440, TS 444
To Next Page
Loading...
