3.Click" Draw A Quadrilateral", move the mouse to the preview
screen and click the left mouse button in sequence to draw the
endpoints of the quadrilateral warning zone to complete the zone
drawing.
NOTE
You can modify the drawn warning line through " Clear All"
and" Draw A Quadrilateral" buttons
Steps 4: Click "Processing Method", set alarm linkage (Buzzer, E-mail
Notification, Channel Recording) and Trigger Alarm Output as required, as
shown in Figure 5-70
○
2
below.
Figure 5-70
○
2
Steps 5: Click "Apply" to save the setting.
To Next Page
Loading...