according to the actual video scene in the scene, and switch the
sensitivity and filtering time of the device according to the fill mode.
When the fill light mode is "Scheduled switch", you can set the daylight
and dark time(ie, start and end fill time) and fill light brightness.
When the fill mode is "Day", the device monitor video is added to
the daytime effect.
When the fill mode is "Night", the device monitor video is patched
into a night effect.
Filtering time: It is used to prevent the ambient light from getting
better and the light is frequently turned on and off, and the
filtering time is set. During this time period, the camera is not
disturbed by ambient light.
Light brightness: It is used to adjust the brightness of fill light, and
the adjustable range is 0-100.
Exposure setting: The default is Auto, which switches the Manual mode
according to actual needs. When "Manual" is selected, the exposure
time and gain control are activated.
Backlight: It is used to set backlight compensation and strong light
suppression. The default is off, it can be turned on manually, and the
backlight can be set.
White balance: The default is auto and can be switched to "Manual".
Manual white balance: Support R, G, B gain adjustable, adjustment
range is (0-255), please click "Save" after setting.
Video adjustment: Here you can turn on and set 2D or 3D digital noise
reduction.
Image enhancement: Here you can select the flicker control mode, turn
on and set the wide dynamic intensity.
Flicker control : The flicker control mode is selected according to
the IPC installation environment and the flicker standard. The PAL
standard is 50HZ and the NTSC standard is 60HZ. When the device
is installed outdoors, it can be selected outdoor. The default setting
is PAL.
Sensor linear WDR: The default is "Shutdown", you can switch the
wide dynamic strength (Automatic, Weak, Moderate, Strong, Super)
in the drop-down menu.
Defog mode: Used to set the defogging mode and strength.
Defog mode: The default is off, and you can select On or Auto from
the drop-down menu.
To Next Page
Loading...