c) Open all of the baskets
Figure 210: Open Baskets
a) Connect the SAS cables and route them through the baskets one at a time. Make sure to follow the
labels to make sure they are connected to the proper port.
b) Connect the power cable to the lower PSU and route it through each basket. The following image shows
the appropriate cable "criss-cross" pattern they should be installed in.
Figure 211: Connected Cable Routing
c) Wrap cable tie around the installed cable bundle between the ports and the first basket of the CMA
202
5 System Management
User Guide 5.4 Daisy Chaining
To Next Page
Loading...
Need help?
General
