HIKVISION AXHub User Manual

Figure 4-3 WLAN Sengs Page
4.
Set IP Address, Subnet Mask, Gateway Address, and DNS
Server Address.
Note
If enable DHCP, the device will gain the Wi-Fi parameters
automacally.
5.
Click Save.
Cellular Network
Set the cellular network parameters if you insert a SIM card inside
the device. By using the cellular network, the device can upload
alarm nocaons to the alarm center.
Before You Start
Insert a SIM card into the device SIM card slot.
Steps
1.
Click
Communicaon Parameters → Cellular Data Network to
enter the Cellular Data Network
Sengs page.
Figure 4-4 Cellular Data Network
Sengs Page
2.
Enable Wireless Dial.
3.
Set the cellular data network parameters.
Access Number
Input the operator dialing number.
User Name
Ask the network carrier and input the user name.
Access Password
Ask the network carrier and input the password.
APN
16

HIKVISION AXHub Specifications

General

Brand	HIKVISION
Model	AXHub
Category	Control Panel
Language	English