HIKVISION AXHub User Manual

AC Power Down Check Time
The system checks the fault aer the congured me duraon
aer AC power down.
To compliant the EN 50131-3, the check me duraon should
be 10 s.
Time Sengs
You can set the device me zone, synchronize device me, and
set the DST me. The device supports me synchronizaon via
Hik-Connect server.
Time Management
Click System → Date and Time to enter the Time Management
page.
You can select a me zone from the drop-down list.
You can synchronize the device me manually. Or check Sync.
with Computer Time to synchronize the device
me with the
computer me.
Note
While you synchronize the me manually or with the computer
me, the system records the log "SDK Synchronizaon".
DST Management
Click System → Date and Time → DST Management to enter the
Time Management page.
Figure 4-30 DST Management
You can enable the DST and set the DST bias, DST start me, and
DST end
me.
Security Sengs
SSH Sengs
Enable or disable SSH (Secure Shell) according to your actual
needs.
Click System → Security → SSH
Sengs to enter the SSH Sengs
page and you can enable or disable the SSH funcon.
Locking User Sengs
Set user locking. You can view the locked user or unlock a user
and set the user locked duraon.
Steps
1.
Click System → Security → Locking User
Sengs to enter the
Locking User Sengs page.
2.
Set the following parameters.
Max. Failure
Aempts
40

HIKVISION AXHub Specifications

General

Brand	HIKVISION
Model	AXHub
Category	Control Panel
Language	English