HIKVISION DS-2TD6237-50H4L/W - Manual Thermography

Point Thermography
Congure the temperature measurement rule and click any point in live view to monitor the
temperature.
Steps
1. Click in the live view and a cross cursor showed on the interface.
2. Drag the cross cursor to desired
posion.
Go to Live View interface to view the temperature and rule of the point in thermal channel.
Line Thermography
Congure the temperature measurement rule and monitor the maximum temperature of the line.
Steps
1. Click and drag the mouse to draw a line in the live view interface.
2. Click and move the line to adjust the
posion.
3. Click and drag the ends of the line to adjust the length.
Go to Live View interface to view the maximum temperature and rule of the line in thermal
channel.
Area Thermography
Congure the temperature measurement rule and monitor the maximum temperature of the area.
Steps
1. Click and drag the mouse in the liveview to draw the area and right click to
nish drawing.
2. Click and move the area to adjust the posion.
3. Drag the corners of the area to adjust the size and shape.
Go to Live View interface to view the maximum temperature and rule of the area in thermal
channel.
3.4 Manual Thermography
Aer enable the manual thermography funcon of the device, you can click any posion on the
live view to show the real temperature.
Steps
1. Go to
Conguraon → Local and select Display Temperature Info. as Yes.
2. Go to Conguraon → Temperature Measurement → Basic Sengs .
3. Check Enable Temperature Measurement.
4. Click Save.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
11